LumariverProfileDesigner104SerialKeykeygen
LumariverProfileDesigner104SerialKeykeygen > https://byltly.com/2tvLlC
How to Create Custom Camera Profiles with Lumariver Profile Designer 1.0.4
If you are a professional photographer who wants to have more control over the colors in your digital photos, you might want to create your own camera profiles. Camera profiles are files that tell your raw converter how to interpret the colors captured by your camera sensor. By making your own camera profiles, you can achieve more accurate and attractive colors, regardless of the camera brand, model, or raw converter you use.
One of the best software for creating camera profiles is Lumariver Profile Designer 1.0.4. This software can make profiles in DNG Camera Profile (DCP) or ICC format, which are compatible with most raw converters on the market. Lumariver Profile Designer 1.0.4 also allows you to design your profile according to your own taste and style, using advanced tools and features.
In this article, we will show you how to create a custom camera profile with Lumariver Profile Designer 1.0.4 in a few simple steps.
Step 1: Download and Install Lumariver Profile Designer 1.0.4
You can download Lumariver Profile Designer 1.0.4 from the official website: https://www.lumariver.com/lrpd/. The software is available for Microsoft Windows (64 bit) and costs $79 for a single-user license. You can also try it for free for 30 days.
After downloading the software, run the installer and follow the instructions to complete the installation.
Step 2: Shoot a Color Target
To create a camera profile, you need to shoot a color target with your camera under the lighting conditions that you want to profile. A color target is a chart that contains a set of color patches that represent different hues and tones. You can use any color target that is supported by Lumariver Profile Designer 1.0.4, such as X-Rite ColorChecker, Datacolor SpyderCHECKR, or IT8.
When shooting the color target, make sure to follow these guidelines:
Use a tripod and a remote shutter release to avoid camera shake.
Fill the frame with the color target as much as possible, but leave some space around it.
Use manual exposure mode and set the aperture, shutter speed, and ISO to get a well-exposed image without clipping or noise.
Use manual white balance or a preset that matches the lighting condition.
Use raw format and turn off any in-camera processing such as sharpening, noise reduction, or picture styles.
Shoot at least two images of the color target under different illuminants (e.g., daylight and tungsten) if you want to create a dual-illuminant profile.
Step 3: Import and Crop the Images
After shooting the color target images, transfer them to your computer and open Lumariver Profile Designer 1.0.4. Click on the \"Import\" button and select the images that you want to use for creating the profile. The software will automatically detect the type of color target and show a preview of each image.
Next, you need to crop each image so that only the color patches are visible. To do this, click on the \"Crop\" button and drag the corners of the cropping rectangle to adjust its size and position. You can also use the arrow keys to fine-tune the cropping. Make sure that all the color patches are inside the cropping rectangle and that there is no gap between them.
Step 4: Adjust and Optimize the Profile
Once you have cropped all the images, click on the \"Profile\" tab to start adjusting and optimizing the profile. Here you can choose between DCP or ICC format, select single or dual-illuminant mode, and tweak various parameters such as white balance, tone curve, saturation, hue twists, look table size, etc.
You can also use the \"Profile Design\" tab to customize your profile according to your own preferences and style. Here you can apply different filters such as contrast boost, shadow lift, highlight aa16f39245